Don’t Work Tired:( - 16 Hours

Today's lesson, Don’t work tired! Today wasn’t a long work day on the Tiki but it was a low energy day. I cut the slot for BH3 (Bulkhead 3) 10mm wide instead of the specified 7mm. The constant shift between inches and mm didn’t help either.

I don’t think this is any kind of tragedy just a little more epoxy filling.  The beauty of this type of construction is that not every cut needs to be perfect since epoxy fillets cover many small mistakes without compromising strength.
The good news is that all the plywood for both backbones, the area between BH2 and BH6, are completed and ready for epoxy.